/etc/ietd.conf  設定

Target iqn.2011-02.net.tk:storage.disk
        Lun 0 Path=/dev/sda4,Type=blockio
        Alias tkiscsi

とだけ設定ひとまず。

iscsi-targetサービス起動

[root@ryu etc]# /etc/init.d/iscsi-target start
Starting iSCSI target service:                                  [  OK  ]
[root@ryu etc]#

[root@ryu etc]# lsmod|grep iscsi
iscsi_trgt             64352  4

[root@ryu ~]# chkconfig --level 345 iscsi-target on

procで状態確認

[root@ryu ~]# more /proc/net/iet/volume
tid:1 name:iqn.2011-02.net.tk:storage.disk
        lun:0 state:0 iotype:blockio iomode:wt path:/dev/sda4
[root@ryu ~]#

イニシエータが接続されると以下のようにわかる。

tid:1 name:iqn.2011-02.net.tk:storage.disk
        sid:281475899523136 initiator:iqn.1991-05.com.microsoft:acer
                cid:1 ip:192.168.0.27 state:active hd:none dd:none
[root@ryu ~]#

/var/log/messages

Feb 13 15:20:36 ryu kernel: iSCSI Enterprise Target Software - version 0.4.17
Feb 13 15:20:36 ryu kernel: iscsi_trgt: Registered io type fileio
Feb 13 15:20:36 ryu kernel: iscsi_trgt: Registered io type blockio
Feb 13 15:20:36 ryu kernel: iscsi_trgt: Registered io type nullio